Español
Low Speed 1KW Magnetic Levitation Wind Turbine on Husum Wind Energy Exhibition
Low wind speed statr-up 1KW Magnetic Levitation Wind Turbine on Husum Wind Energy Exhibition
Quick detail
1. Magnetic levitation technology
2. Independent of the direction of the wind
3. Startup at low wind speed of 1m/s
4. Higher efficiency compared to traditional HAWT
5. Magnetic Levitation Wind Turbine Works even in turbulence
6. Visually pleasing appearance
7. Turbine construction is resistant to gale 60m/s (132MPH)
Description
The HECO series of Magnetic Levitation Wind Turbine undergoes a continuous improvement process, which incorporates exterior design, utility design, electrical engineering, dynamic engineering, power mechanics, aviation air engineering, wind tunnel testing, lightening protection, computer simulation techniques and other multiple subjects.
The 1KW Magnetic Levitation Wind Turbine was exhibited in Husum Wind Energy Exhibition in 2012. Visitors were surprised by the turning heavy wind turbine which was blowed by a fan. The magnetic levitation technology is firstly applied to wind turbine, and the theory is just like maglev train. There's no friction, no gear inside the alternator. Breeze can start up it. The unique wind turbine is with following design benefits:
1, Lighting Arrester: On the top of wind turbine, you can see a ball that we called Lighting Arrester. It can keep the outdoor system safe from the thunder and lightning during the raining days or storm weather.
2, Blades: Three blades material is Aluminum Alloyed and with "DACROMAT" technical treatment. The design is similar to Aircraft Wings. One side is thicker and the other side is thinner. Also they are in highly conformance so that can balance the wind turbine.
3, Wind Cone: The Wind Cone is a suction device. The Material is also Aluminum Alloyed and with Anti-Oxidation Treatment. The red and blue color decorated wind cone, makes the wind turbine special beautiful and also protect the flying from been hurt.
4, Alternator: The maglev wind generator's most important part. Adopt with Magnet Levitation Technology, no mechanic friction, silent and easy rotating.
5, Breaker: The mechanic breaker at the alternator allows you the third way to break our maglev wind turbine.
Application
The magnetic levitation wind turbine 1000W can be used for homes, telecom station, and farms. It can be on grid and off grid, depends on the requirement from client.
Specification
| tems | HECO1000 |
| Rated power | 1000W |
| Dimension (Height/Diameter) | Ø2200mm / 2400mm |
| Weight | 180 kg |
| Blade material | Aluminum Alloy |
| Blade quantity | 3 |
| Swept area ㎡ | 3.6 |
| Min starting wind speed | 1.5 m/s |
| Cut-in wind speed | 3.5m/s |
| Rated wind speed | 13m/s |
| Cut-off wind speed | 15m/s |
| Survival wind speed | 60m/s |
| Generator type | AC,3Phases |
| Controller Output Voltage | 48V |
| Controller Braking System | 3-phase short circuit by NFB brake |
| Ambient Temperature | -40～50 ℃ |
| Noise | Less than 40dB |
| Annual Energy Production (@ 5 m/s) | about 750 kWh |
Advantages
|
HAWT AND MVAWT |
||
|
Item |
Horizontal axis (HAWT) |
Vertical axis (EML) |
|
Start wind speed |
High(≥3m/s) |
Low(1m/s) |
|
Wind conditions required |
Require stable wind direction |
Any wind direction |
|
Encountered turbulence |
Reduce the efficiency |
Efficiency is not affected |
|
Power stability |
Change by wind direction |
Without any wind effect |
|
Noise |
Large(45 decibels or more) |
Low noisy (because there is no mechanical friction) |
|
Product appearance |
Normal |
Beautiful |
|
Installation height |
High(need to avoid the terrain turbulence) |
Low(not afraid of turbulence) |
|
Installation location |
Just in open area like suburb |
Any location |
|
Generator material |
Plastic or composite |
metal |
|
Structure strength |
Poor (easy to broken) |
High(double strengthen arm) |
|
Resistance of wind speed |
Poor(about 40 m/s) |
High |
Residential Vertical Wind Turbine
,Vertical Axis Maglev Wind Turbine
Mr. Jimmy Lv
Sales Manager
- Email: info@allsolarkits.com
- Tel: 008618819078989
- WhatsApp: 008613480892975
-
WeChat:
008618819078989
- Skype: milksunson
-
Magnetically Levitated Wind Turbine 60W LED Wind Solar Hybrid Street Light System
Magnetically Levitated Wind Turbine 60W LED Wind Solar Hybrid Street Light System Technical Specifications Maglev Wind Generator Rated power Approx. 300Wh at 13 m/s (26 mph) Swept Area 0.8 m2 Height / Diameter 1.23/1.09 m Weight 27 kg Shipping Dimensions 1160 x 520 x 790 mm 56 kg Startup Wind Speed ... -
300W Roof Mounted Stand Alone Maglev Wind Turbine for Home , 12V / 24V
300W Roof Mounted Stand Alone Maglev Wind Turbine for Home , 12V / 24V Description Honor Eco maglev wind turbine have 6 models, 200W, 300W, 400W and 600W, 1KW, 3KW are for hybrid street lighting, home use, telecom station or any place need independent power. Our 300W Maglev wind turbine mainly ... -
Three Phase AC Maglev Wind Generator Solar And Wind Powered Street Lights
Three Phase AC Maglev Wind Generator Solar And Wind Powered Street Lights 1. Description: Maglev Wind Generator with Three-Phase AC is very suitable for building wind solar hybrid lighting system for parking lots. The system consists of CXF-300W wind turbine system, solar panels, wind solar hybrid ...
